{"product_id":"manual-electric-wire-stripping-machine","title":"Manual Electric Wire Stripping Machine","description":"\u003cdiv\u003eWire Stripping Machine - Manual \u0026amp; Electric Drill Compatible (2-16mm Soft Cable Only)\u003c\/div\u003e\n\u003cdiv\u003eKey Features:\u003c\/div\u003e\n\u003cdiv\u003e- Durable steel body - high strength, long-lasting\u003cbr\u003e- Full-metal bearing feed wheel - smooth, stable, and efficient\u003cbr\u003e- Carbide sharp blade - hardened, wear-resistant, with dual bearings for smoother stripping\u003cbr\u003e- Adjustable cutting depth - spring-loaded self-adjustment (1-6) plus manual screw fine-tuning\u003cbr\u003e- Dual drive options - use the ergonomic hand crank, or connect to an electric drill for faster stripping\u003cbr\u003e- Multi-hole feeder plate - suits different cable thicknesses within the compatible range\u003c\/div\u003e\n\u003cdiv\u003eCompatible Wire Types:\u003c\/div\u003e\n\u003cdiv\u003eSuitable for soft-plastic sheathed wires, optical cables, multicore cables, twisted wires, aluminium wires, soft copper wires, hard copper wires, and similar flexible cables.\u003c\/div\u003e\n\u003cdiv\u003eDiameter range: 2mm - 16mm\u003c\/div\u003e\n\u003cdiv\u003eIMPORTANT - NOT SUITABLE FOR:\u003c\/div\u003e\n\u003cdiv\u003eThis machine is designed for soft outer sheath only.\u003cbr\u003eDO NOT use on:\u003c\/div\u003e\n\u003cdiv\u003e- Wires with iron or steel armour \/ metal cladding\u003cbr\u003e- Hard plastic outer sheaths\u003cbr\u003e- Flat cables (ribbon-type)\u003cbr\u003e- Any cable with sheath thickness over 6mm\u003c\/div\u003e\n\u003cdiv\u003eUsing this machine on unsuitable wires may damage the blade, jam the gears, and void any claim.\u003c\/div\u003e\n\u003cdiv\u003e---\u003c\/div\u003e\n\u003cdiv\u003eSTEP-BY-STEP OPERATION TUTORIAL\u003c\/div\u003e\n\u003cdiv\u003ePlease read and follow every step carefully before use:\u003c\/div\u003e\n\u003cdiv\u003eStep 1 - Check Blade Alignment\u003cbr\u003eConfirm the blade is aligned with the gear V-groove.\u003cbr\u003eIf not, adjust the blade position until they match.\u003c\/div\u003e\n\u003cdiv\u003eStep 2 - Feed the Wire Straight\u003cbr\u003eKeep the wire completely straight as it enters the machine.\u003cbr\u003eEnsure no gap between the two feed gears - they must touch firmly.\u003c\/div\u003e\n\u003cdiv\u003eStep 3 - Test Blade Rotation\u003cbr\u003eManually spin the blade with your fingers to check it turns freely.\u003cbr\u003eIf it does not rotate, loosen and adjust the two screws on both sides of the blade until it moves smoothly.\u003c\/div\u003e\n\u003cdiv\u003eStep 4 - Correct Feeding Direction (Very Important)\u003cbr\u003eThe inlet plate must stay in the lower position at all times.\u003cbr\u003eThe wire needs to climb upward (like going uphill) into the machine.\u003cbr\u003eKeep turning the hand crank while feeding - this assists the climbing motion.\u003c\/div\u003e\n\u003cdiv\u003eStep 5 - Adjust Blade Pressure - DO NOT OVERTIGHTEN\u003cbr\u003eGradually increase the pressure while feeding the wire.\u003cbr\u003eStop and check: the blade should just cut through the outer insulation - not go deeper.\u003cbr\u003eIf you tighten too much in one go, the blade will dig in and the wire will stop moving. This will jam the machine and may damage both the wire and the blade.\u003c\/div\u003e\n\u003cdiv\u003eTip: Adjust a little, test a short piece, then fine-tune - this gives the best result.\u003c\/div\u003e\n\u003cdiv\u003eWhat's in the Box:\u003cbr\u003e1 x Wire Stripping Machine\u003c\/div\u003e","brand":"Salelink","offers":[{"title":"Default Title","offer_id":48501347483869,"sku":"GZJ2629","price":29.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0851\/4954\/8765\/files\/10_e6f7ecba-0ad4-47a9-a360-e07660c4d736.jpg?v=1788490933","url":"https:\/\/noluxapp.myshopify.com\/products\/manual-electric-wire-stripping-machine","provider":"Nolux","version":"1.0","type":"link"}